Thanks for new update. This is most stable version.

beautifu! beautifu! beautifu! thank you very much!

Jedva sam cekao novu verziju, zaista je fantasticna. Preporucujem je svima.

da li mogu preko postojeceg rom-a instalirati ili ga moram prvo obrisati?

it is better than vegacomb

One word: FANTASTIC !!!

Great, it’s so simple to install for newbies. Great work.

Svaka cast za ovo! Mogu li ovaj tekst da postavim na moj sajt?

Sve pohvale za rad, drago mi je da u Srbiji postoji neko ko se interesuje za razvoj android platforme. Isprobao sam viewcomb, stvarno mi se svidja, cak mislim da je za nekoliko koraka ispred vegacomba. Sve najbolje vam zelim u daljem radu.

finally flash player works properly in stock browser. I like so much this rom.

Excellent! In my opinion, it should be official ROM for viewpad 10s.

Ovo je super odradjeno, ne menjam ga dok ne izadje novi update.

Many thanks! Perfect ROM for my ViewPad 10s.

Easy to install, stable system, beautiful graphics. The best custom rom ever.

Gde mogu da kupim musko-muski usb? Hteo bih ovo da probam, jako mi se svidja ovo sto vidim na slikama, ali ne mogu nigde na nadjem gde ima da se kupi taj kabel. Pozdrav i hvala!

This looks fantastic, and it’s my favorite rom from now. :)

meni treba mala pomoc, kada nakacim tablet na usb, naravno ugasenog, ne prepoznaje ga patch? da napomenem da sam instalirao drivere za tablet prosli put pri instalaciji…hvala!

e ovo sam duuuuuugo cekao, novi honeycomb na starom dobrom viewpad-u 10s, hvala puno za ovaj rom, izgleda stvarno predobro kad se instalira.

Viewcomb rules!

fenomenalno odradjeno, jos da proradi hdmi na full screen i ovo ce biti najbolji rom. ustvari vec sada je najbolji. ziveli!

Ovaj novi market je extra i mnogo je bolji od onog starog. Vise mi se ne desava da nece da instaira neke aplikacije. Moze jedno pitanje..kako da ubodem usb stik tj da vidim sta ima na njemu? Hvala unapred za odgovor.

installed. very well.

odlicno, svaka cast.

Hi! I installed ViewComb and i’m happy, but..
I have a question: The viewpad 10s has 512mb of RAM, but only 256mb are recognized when i check it on all system info apps. ¿Why? Where are the other 256mb? It’s alimitation of honeycomb, or…?
If you could explain it..

Thanks.

samo kratko pitanje,jel postoji nacin da se sacuvaju predhodno instalirane aplikacije, posle update roma? da ne bi sve morao ponovo da instaliram :)

Hello and thanks for the good work. i have a smartbook surfer 360 and vegacomb not work on it. only your viewcomb runs fine. my only little problem is that the homescreen (launcher) crashs when i turn the device on. i cant install another one .. any idea ? many thanks ..

No further updates or improvements?

Thanks for the great work for viewpad, just a fe issues to repare:

Multitask,when you put in second plan a app at reestart it ,te app recharge again nota real second plane forma some apps,perhaps its honeycomb rules(its my first time with honeycomb)

Browser sometimes close with no apparent motive.

For me te best its the battery autonomy, full since 07:00 am sometimes in suspense mode,at this ti me 00:16 battery icone say 44% this its great for mobile work outside home.

Evo ovako…presao sam sa build 3 na build 5. Prvi utisci. Baterija drzi MNOGO bolje kad je na stand by-u, browser mnogo baguje tj. crash-uje cesto i to ne samo stock…nego svi. dolphin, opera itd…. Jos uvek problem sa USB stikom…prepozna ga ali ne uvek i kad se ubode usb stik izbacuje neki error oko SD kartice. Ovo su moji prvi utisci. Nadam se da ce build 6 biti mnogo stabilniji.

Veliki pozdrav druze!

Pozdrav to radi na Motorola Xoom, mogu instalirati? Moj 3,1 br

pozdrav i hvala jos jednom.ja imam problem sa zvukom, tj mikrofonom, nije cist zvuk u skypu i gtalku, malo kao da bruji, tj kao da je prejak, preosetljiv,ne znam,ranije nisam imao taj problem.ima li neka ideja.pozzzz

pozdrav svima,imam prob.sa viewpadom 10s,ako neko moze da mi pomogne bio bi mu zahvalan..zaledio jednostavno,ne reaguje na dodir,kad ga upalim samo onako ikone stoje,sve mrtvo,hoce li meni pomoci sta ovaj postupak,ima li lijeka za njega.nije ispadao,kupljen na aukciji u inostranstvu,novo u kutiji ne upotrijebljeno ali kad sam dosao kuci problem…sta mi je raditi??molim nekoga ako ima strpljenja i razumijevanja da mi opise postupak ako postoji???hvalaa

Could you please help me? I use build 5 now and I don’t know how to install build 5.1. I’ve tried to push power button, then recovery and after that I insert the usb cable into the computer and nothing happens. Please respond in any language you want? google will translate any way=)

Very good rom, but i has a problem with a ram. On vegacomb i have 220 free ram, but on this rom i have max a 120, many apps crashed and not running(

Thanks

Da li je moguce da nam das i zip varijantu da mozemo preko cwm da ga instaliramo kao sto si nam to omogucio u prethodnim verzijama

WiFi + bluetooth working perfect together on original system (I test on Tunein). On Vegacomb and Viewcomb doesn’t work at all.

Pozdrav Vujke. Naime posedujem Viewpad10s,tragao ja za ROM-om kad naleteo na tvoju stranicu.Sav presretan sve poskidao od Drajvera Pa do najnovijeg ROM-a i naravno doslo do problema stala instalacija kod system.img-a sendinguje sendinguje sat vremena ja ne znam sta cu.Ja sve iskljucio(mislim kablove cmd na x i probao da upalim i od tada Black screen.Zelim da pitam zna li neko da mi da savet sta dalje da radim

Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0×20 major: 1 minor: 3
chip sku: 0×8
chip uid: 0x027c10844300c117
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader — load address: 0×108000 entry point: 0×108000
sending file: bootloader.bin
/ 524288/941512 bytes sentdata send failed NvError 0×120002
command failure: bootloader download failed (bad data)

Press enter to continue:

Pozdrav Vujke. Cini mi se da znam u cemu je problem. Posle greske od juce sa system img. sam pokusao da stavim firmware 1.09 naime zakucao se takodje na boot.img tj. sendingovao maltene sat vremena i od tada je greska koju sam postovao.E sad cini mi se vise nego sigurno da je u toku flash-a izbrisan bootloader na systemu i ne moze da nastavi instalaciju.Ne znam da li je moguce ili ti pametno sa SD kartice pokusati pokrenuti nekako bootloader? Ili jednostavno Driver pravi neki problem….mada se PC i 10s vide…ne znam biti pametan…..

Hi, Vujke, do you have time to finish a build with the latest patches?
The guys in Modaco are seeking for someone to do this job.
http://android.modaco.com/topic/330834-advent-vega-kernel-source-code-now-available/page__st__740

Pozdrav Vujke,

Ne prihvaća pin od SIM kartice, što god ukucam…
Modul je HUAWEI EM770W 3G…

Sta mislis u cemu bi mogao biti problem? Imas neki predlog?

Evo skinuo sam novi Upload…..javljam utiske uskoro…nadam se da ce uspeti da ozivi :-(

Pozdrav Vujke,

Provider ne dozvoljava isključivanje provjere pin-a…(Tele2 mreža)
Imaš kakvu drugu ideju?

E evo me sa novim momentima…..

Nvflash started
rcm version 0X20001
Command send failed (usb write failed)
Press enter to continue:

Da li je mozda bila greska ili je jos uvek u Driver-u? Jednostavno u Device Manageru kad udjem preko 10s pojavi se NVIDIA USB Boot-recovery driver for Mobile device, kad izadjem drzeci stisnuto Power nestane sto je i ok…ali desava se jedna veoma cudna stvar za nekih 6 sekundi na Power dugme kad ga gasim nestane driver u Device Manageru sto je isto OK ali isto tako drzim Power (ali samo Power bez 2+2+2) i pojavi se driver sto je nelogicno i cudno…sta ti mislis sta bi to sad moglo biti?

Instalirao Driver sve odradio bez problema sto se drivera tice i sve se isto desava sa Power-om se pojavljuje i gubi naravno samo sa punjacem je i moglo i moze da se uspostavi komunikacija.

Oho pazi sada ovo drzao sam Back 30 sec i kao da se otkljucao USB port dosao sam do boot loadera i naravno tamo stao posto ga ne vidi na 10s jer se ili zakucao ili izbrisao ili sta vec……..

mozda sam ja vec utripovao i slucajno uspeo da udjem i stignem do pokusaja komunikacije izmedju PC-a i 10s gde je stao kod bootloadera jer ga ne vidi na tablet-u a veoma tesko ostvaruje komunikaciju mislim kad pokrenem nvflash stane kod usb write failed.Samo da napomenem da je kabel dugacak minimum 3 metra….

nisam ali to ce biti sledeci pokusaj da se ozivi pad.

YEEEEEEEEEEEEEEEEEEEEEEEEES :-)))))))))))))))))))
Kabel je bio problem koji je kupljen u Pakomu on radi ali je predugacakkkkkkkk,ne sme biti usb dugacak..isto pravilo vazi za stampac (secam se jos od pre 10 godina da je receno) takodje i za Plazma-LCD TV konekcijska veza sa externim uredjajima USB,HDD……znaci uspeli.Vujke spasili smo Tabletu…..ostajemo u kontaktu i pratim dalje tvoje radove…upravo podesavam tvoj rad :-)))))

Nije mi jasno ovo… Komanda „cat /proc/meminfo“ kaže da imam 256MB… vidim da si već nekome napisao da je ovo normalno jer je ostatak namenjen za sistem… Tu meni nešto smrdi kada sam Linux ispod celog Androida prijavljuje ovo… ovako imam svega 40tak MB slobodno kada pogledam settings deo! Music aplikacija mi se gasi čim pokrenem browser ili neki drugi zahtevniji program jer pretpostavljam da nemam dovoljno RAM-a!

Hi,
First of all I must say that you’ve done a very good job.
Some things like the installation process have been improved compared to vegacomb (this rom is much more easy to install).
However, I have found the following issues:
- 16bit color depth (instead of 32bit with the stock ROM). You can test it here.
- Faulty touch screen. This is very annoying and happens quite frequently. Sometimes it behaves wrongly from startup.
- Images in UI – like the one at the top right corner for google search – appear scaled/filtered, probably due to the 1024×600 resolution + 16 bit color depth
- Slow OS UI. For the HW specs of this tablet the Honeycomb should run smoothly.

Hi,
So interested with this rom. Few newbie questions:

1. Will it work with 3g usb modem ? I have huawei e173
2. Is it possible to go back to previous stock rom?
3. Will the bluetooth and hdmi works?

Sorry for this stupid question, i’m totally new with this tablet world..

Thanks!

Hello Vujke,
and thanks for the good work.
i have a smartbook surfer 360 and ViewComb 3.2b5.1 work on it.
my only little problem is that the Navigation not run. any idea many thanks ..

Ja ti se pohvalim za rad, drago mi je da je u Srbiji neko ko se bavi razvoj tog Roma.
Isprobao sam viewcomb, Do sada stvarno mi se svidja, cak mislim da je za nekoliko koraka ispred vegacomba. (probao sam i taj ali se meni ne vidi)
sacekam build 6 i do toga moram proveriti zasto ne radi GPS na mom Surferu on mi nema Sateliti.

Pozdrav Boris

Vujke jedna molba. Imam Telenorov usb stick modem mislim da je e1550 ali ne smem da se zakunem. E sad kada ga prikacim na tablet on registruje nesto ali ne mogu da ubacim setovanja za telenor odnosno ja ubacim apn settings ali nece da zapamti setovanje. U cemu moze biti problem. Inace jako sam zadovoljan romom i odlican je, jedino sam morao ipak da oborim frekvenciju zarad stabilnosti. Veliki pozdrav!

Hi Vujke
Mozda imas Resenje za mene
ja nikako nemogu da dobijem SMS na mom smartsurfer 360, ne postoji aplikacija za to.
telefon zvoni i ja mogu da podignem ali nikoga ne mogu da cujem niti mene necuje nitko, jeli tu ima jeda greska ili moram cak neke dodatne aplikazije instalirati ?

Pozdrav Boris

Vujke,

Your build 6 is already there..
Time for you to update this webpage right? :p

maybe it’s better without uploading build 6, because of bootloop :/

6 bootloop built when starting from the first installation fails to start even once
6 beta bootloop built when you install some applicable or restore backups from both the sd and from gmail or from ClockworkMod
built 5.1, works fine but consumes lots of RAM and some applications are closed and I think it manages 512 of ram

such works the flash player? (if you’ve tried it)
and thanks for the new link and answering

I tried the alternative 6 also gives me bootloop
thanks

Hi Vujke

moj test Build 6 na surfer ima Bootloop i alternativna versia isto,
build 5.1 je perfektna sms je radio i telefon mi ne trebe ali bez GPS mi ne odgovara.
na zalost vratio sam se na mom original surfer rom.

Poz Boris

Ne mogu da instaliram nijeda build 6. Ulazi u bootloop i tu je kraj . . . . .

on (smartbook) Surfer360 MN10U
B6-RC03 still bootloop
B6-RC04 An unexpected reboot at start of google maps (also works)
B6-RC05 good work

Good work all works very quickly, unfortunately, not gps

Can you fix the GPS problem for my book by going to the original Driver extract it by surfer rom

thanks Vujke

Hi,

I’m using B6-RC05 now, so far sooo goood!
Thanks for the ROM and easy installation! Good Job… :)

Quick question, the flash doesn’t seem to work, should i download it from the market?

Hi Vujke
can I help? what you need for the integration I do not understand.
that means I’ll never can use GPS.
But the tablets may be identical in design and function, only the UMTS/GPS chip may not be identical?

oprosti za tvoj zivac ali nemam nicoga da bi to ucinio neko za mene.
ako imas paypal ja bi ti i platio,samo da proradi .

How can I make screenshots?

Hi,

How can i use 3G sticks with this rom?
should i download dialer/apn apps?

step by step would be nice :)

thanks again..

Hi Vujke,

I have installed build 6 and seems that color depth problem is not yet solved.
Color depth is still set at 16bit but it should be 32bit in order to get the most of our ViewPads (display driver?).

what was that on the Xda
full of wacky juser, not falling on her nivo,
I think your great work and I have to android-aid already said,
I follow your work and hope you continue doing that
greetings, boris

Big thanx from Russia. It`s great!

Build 6.1 is ready for download in the first post.
Any feedback is welcome.
Thank you in advance.

Build 6.1 je dostupan za preuzimanje gore u tekstu.
Svaka povratna informacija je dobrodošla.
Hvala unapred.

Build 6.1
Not connected to hidden Wi-Fi networks, hangs on stage „Search Wi-Fi“.
If Wi-Fi not hidden – no problem.

Build 6.1
Evo moj test

sve wifi netw, rade search wifi ok
ako upischem manualno SSID nece da konektuje ako je u stanje hidden.

Hello,
are the changes in Build 6.1 referring to wifi the same as mentioned in this Thread:
http://forum.xda-developers.com/showthread.php?t=1352144
?
Or do you have make some different stuff?
Unfortunatelly tha Thread didn’t solved my Problem with the network of my univrsity.
Does anybody know whether a former Build of Viewcomb have no problems with PEAP/MVSCHEAP2 and so on?

Great work!!! It just like bring me a brand new tablet!!! A little pity that there is no Chinese Traditional input such as Zhuyin(Phonetic), Cangjie, Handwriting…etc.

Hi Vujke

mene zanima dali radis na „Ice Cream Sandwich“, za tvoj ViewPad
jos vise mene zanima dali ce onda imati gps koji radi .

pozz boris

Vujke,
ima li razlike između tvoje verzije i nove verzije na tabletroms forumu Posebno me zanima dio vezan uz SuperCharger V6 skript i koliko to ima smisla.
Inače, nikako nisam mogao instalirati 3.2.6 verziju na POV Mobii (bootloop), dok tvoja 6.1 verzija radi bez problema…
Hvala!

Thanks for new update.Best ROM ever

hi Vujke
my Bluetooth not working….

Good Job !!!! keep up! When we gonna get ICS?

pozdrav. razmisljam da kupim viewpad10s. cijena je u austriji jako povoljna pa bi mi drug doneo. interesuje me da li se moze kako omoguciti 3G konekcija? preko usb modema? hvala unapred na odgovoru:)

meni ne treba GPS vec 3G. vjerovatno si se zbunio jer tvoj ima 3g ugradjen. na androidtablets.net kazu da moze huawei 3g modem

Vujke,

Does in-built 3G modem for Viewpad 10S 3G work?

Zanima me da li postoji neko resenje za web broswer, na svim romovima nastavlja da puca povremeno…

Hi Vujke
The application Riptide GP (process com.vectorunit.blue) has stopped unexpectedly….
Thanks Vujke

Hi. Very like your builds, but in 6.1 and 6.3 have some problems, that didn’t have in 5.x.
Such as errors with Wi-Fi network stability and often unexpected stops on included browser and youtube. Clearing dalvik and reinstall don’t solve problems. Please do something! Thanx to the future

Thank you for ViewComb! I got my Viewpad 10s, one without 3g, a couple of days ago and flashed your 6.3 build last weekend. It was a huge leap forward. Touch screen is working perfect, so far no problems with wlan reconnecting after sleep.
Then I copied some music to the SD card and listened using my A2DP headset (a cheap one). Sound was perfect. However, when I started using the browser while listening locally stored music over bluetooth wlan had become awfully slow. YouTube with A2DP sound was awfully stuttering. I remembered having read something about wlan-bluetooth concurrency at MoDaCo and checked whether the abtfilt daemon was running (ps | grep abt) – no. So I started it (su /system/bin/abtfilt wlan0). It definetly helped a lot, though YouTube buffering could not reach the speed for uninterrupted playback. That seemed only possible when I completely switched off bluetooth. Now, that I am writing this, I realize that I should have issued /system/bin/abtfilt -c -d -z -n (#777 by Eduardo in the MoDaCo thread). But it was not too bad, Chromium on my Ubuntu laptop in the same wlan also could not reach the required speed for the same YouTube video at 720p.
My question: Can you enable the abtfilt service in your next build? I guess just editing init.rc as I would do it on a linux box will not help me, as it has to be in the RAM disk for ViewComb.
Thank you again.
Michael

el mogu ja nekom da platim da mi instalira viewcomb na viewsonic. Hvala

hi, i had bought a viewpad 10s wifi + 3G model, just today. have been researching on the internet for the past one week for tweaks and tips. i would be grateful if you could clarify some points : (pls excuse me as i am a complete newbie to both android and tablet)
1.what is „the stable“ latest rom for viewpad 10s ? i am confused as to flash which build ? build 6.3 or 9n or 9b ? also i have win 7 laptop, tab bought as replacement to my old laptop.
2.can the viewpad 10s read/detect external HDD ? i have a 320GB HDD with all my music, photos, apps, files, docs etc.,.
3.how to automatically make the tab detect external hdd ? how to enable auto host usb mode ? am i right ? in slave mode, it does not detect.
4.what is the max clock frequency recommended for continuous running ? is 1.2GHz safe ? i might use the tab continuosly for 4-6 hours sometimes.
5.can an external dvd writer be used in the viewpad 10s ? if not, its ok, its not a big problem. what all features cannot be accessed by the tab ?
Thanks for your info, have a nice day, cheers.

Pozdrav! Imam tablet, Point of View Mobii 10.1 Tegra 2. neki kazu, da su to isti uredjaji, kao 10s, ili Advent Vega.. Dali mogu, da stavim ovaj soft, na tablet? Puno hvala !!

hi vujke,
thanks for the version 7.0 – i just now downloaded it, yet to install in the viewpad 10s.
will use it for a few days and tell you the results.
thanks again.
best regards.

Imam pitanje, sada kada je izasao build 7 el treba ceo proces ispocetka da instaliram ili ima update. Hvala

Posle instaliranja builda 7 i restartovanja pojavljuje mi se poruka Starting Fastboot USB download protocol i tu je kraj ne mrda a posle restartovanja isto.Sta da radim?

Ali kako da instaliram ,uvek mi se ponavlja ista poruka.

Ne moze uvek se pojavi ista poruka i tu je kraj.

Sve radim po uputstvu nije mi prvi put, sve je bilo u redu do ove verzije 7 posle restartovanja pojavila se poruka u gornjem levom uglu Starting Fastboot USB download protocol i ne mogu nista instalirati uvek se pojavi ta poruka pri paljenju tableta i pri pokusaju povezivanja sa kompom radi instalacije.Ne znam sta da radim.Hvala na svakoj pomoci

I get force closes in the stock Internet Browser in your build 7,01

I ovo sam probao ali ne uspeva
1) holt power for 10-15 sec to power off unit
2) unplug usb and power for ~10sec
3) plug power and usb in and wait ~10sec
4) use the apx combo (back (2sec) –> back + pwr (2sec) — pwr (2sec) )
vidim zale se jos neki na build 7 a kazu da se desava i sa 7.1.Neka pomoc?

Uspeo sam jeee,Hvala Mordasov-u na uputstvu.Instalirao sam 7.1 valjda ce biti sada u redu.

good rom but will not sync with google calendar and contacts

That is to say 7.0 and 7.1.
6.3 was fine so will go back to that for now.

In builds 7.0 and7.1 syncing with google calendar and contacts does not work.
Otherwise brilliant job.

Vujke i na 7.1 se isto desava poruka Starting fastboot USB download protocol vracam se na 6.3 nadam se da ces ovo srediti.Pozz

verzija 7.1- prilikom restarta- viewcomb se zamrzne na „Starting fastboot USB download protocol“ Ima li nekog resenja?

Ja sam isto dobio „Starting fastboot…“ pa sam ga na ovaj nacim vratio u zivot.

Pleas try this (to the letter!):

Unplug USB cable and power adapter
Reboot the PC
Turn off the Vega by holding the power button for about 10 seconds
Plug in the power adapter and connect the USB cable to both PC and Vega
Press and hold back button…
After exactly 1 second press and hold power button tto (don’t release back button)
After another second release the power button (keep pressing the back button)
After yet another second, release the back button too…

It should be in flash mode now…

If not, try this:

Unplug the power adapter
Press and hold the back button
While pressing the back button, plug the power adapter back in…

Hope the device is in flash mode now…

If not, try again and again…

Kada pokušam namjestiti statičku ip adresu ne želi mi se konektati na mrežu. Ideje zašto??

Hi
After few restarts I’am getting : Starting fastboot USB download protocol – build 7.1 and 7.0

Back to 6.3 .

Hi,
Have noticed this rom has been withdrawn from tablet roms.
This is such a shame.
I cannot understand anyone complaining about this rom.
If you do not like it ,do not use it.
But have the decency to let those of us who do like it have the chance of using it.
None of the roms I have tried have been perfect and this is by far one of the better ones.
Easy to load and very stable.
Please, please do not stop developing this rom as we need more roms for the future.
Best wishes for 2012
drc

Great work the 7.0 and 7.1 but there are two issues: 1) after few restarts I’am getting : Starting fastboot USB download protocol – build 7.1 and 7.0. 2) the bluetooth still not working with wifi. I hope these two issues can be fixed because i am fan. Keep up the Great Work!!!!!

My Pad wont even start, just get a blank screen, How do I get into the recovery mode? Tried pressing all sorts of buttons when powering up….

SRECNA NOVA GODINA……SVE NAJBOLJE……………………

I had the same problem with build 7.1, after reboot blank screen and message „Starting fastboot USB download protocol“. The problem is getting into usb-host mode, because 1s after pressing start button (backward button pressed) this screen appears! I had to repeat the steps several times to get into usb-host mode, so don’t give up ;)
Thanks for your work on this project, Vujke! I really appreciate it!

Hi, Vijke,
Has development stopped on this rom? I think I saw some reference to you working on a Viewpad ICS rom? Is there another forum for that?

Da li ima jos koga koji nije uspeo da resi STARTING FASTBOOT USB DOWNLAND PROTOCOL problem ili sam to samo ja HEHE, ne mogu da udem u flash menu sa mojim Smartbook surfer 360.

Hi Vujke!
Thank you for the new 7.2 ROM!
Almost perfect, but it does not work with USB … voltage does not give a mouse, stick, external HDD. Will it improve the 7.3 ROM?

Regards! Mlaci

Svaka čast Vujke, da radis na ovome. Drugčije bi još bili na 2.2 ili vegacomb, sto nije toko stabilan. skidam kapo!

Urađena clean instalacija, i nakon dan-dva, sam se resetuje i na ekranu se pojavi poruka „Starting Fastboot USB download protocol“ i više nemože da se redovno startuje tablet, već moram ponovo instalirati OS! Ovo mi se već drugi put desilo u roku od 5 dana!

New build! Excellent! Thank you, Vujke! :)

I’m still using 6.3 becouse every later rom has problems. I would like to install 7.2 but if it’s true what member „Mlaka“ said, that there is no support of HDD’s and external keyboards and mouses then i’will keep using the older 6.3 version.

Hi Vujke,
Congratulations on this rom.I have been using it for the last couple of days and have had no problems so far.
As you say everything is working including the usb which someone on here commented was not. It has now synced with my google apps which I have had a problem with before.
I can also now swap between Honey Ice and ICS very easily which is also a bonus.
Brilliant work.

Drc.

Build 7.2 je otklonio gresku! Hvala puno!!!!
Da li neko zna kako da nateram 3g modem Huawei MF190 da radi (VIP mobile), posto ga samo prepoznaje kao ostecenu SD karticu! Da li postoji neki dodatni drajver?

Hvala Vujke, spasio si moj smartbook surfer 360 od njegovog orginalnog i loseg ROM-a, u 7.2 build sve radi osim sim kartice koju ne prepoznaje i daje error.
Ako imas pay pal rado bih ti platio pivu, hvala jos jednom.

Hi
I’m going to install your room. Do I need to do wipe data and cache in recovery or instalator will do it itself ? If yes how to do this?
Thanks for huge job you’re doing.

Hi
Could you help me? I have serious problem. I can’t install usb drivers on my windows 7. Any directions? System doesn’t see tablet as APX, but as „Other different device“, and says that drivers are incorrect.

Other question is: is there any way to install ROM from sdcard? I see that it might be only way in my case.

Thanks for the update.
A question, there is any driver to usb webcam for example genius or logitech, for use this like HD recorder?. I have a viewpad 10s. Thanks again and best regards for all.

Pozdrav,
zahvaljujem na ovom. Odlicno je. Imam dva problema: 1. ne spaja mi se na eduroam wireless. sa androidom 2.2 se spajao. ne prihvaca TTLS i PAP, a drugi problem je sto me pita pin sim kartice (passcode) i kad upisem pin, javlja da je pogresan. jel ima neka caka?

Pozdrav. Ima li šanse da ovaj ROM radi i na ViewPad 10, ali bez S?

Svaka čast na uloženom trudu i vremenu!

Pozdrav,
upravo sam instalirao ViewCOMB 3.2 Build 7.2 i sve je super osim sto na skype nece da inicijalizuje video.Odnosno pusti ga jedanput i odmah zamrzne, a sledeci put kad pozovem kaze da ne moze da inicijalizuje video .Neka ideja?Hvala unapred.
Inace svaka cast za trud

As I have just sold my POV Mobii tablet, I would like to state the following:

1. Thank you for the good work that you are doing and that you will do further in developing custom ROMs for our devices.
2. Maybe one day all the fights and quarrels between all the developers will come to an end and you will gather together into developing the best ROM for our tablets.
3. It has been a 1 year journey together with good and bad things, but overall the experience was one in a lifetime.

Thank you very much,

Best regards

Iulian Vicu (iulipepe)

Fantastican rom, svaka cast za ovaj mod.
Imam samo jedan problem s njim. Kako nikada ne iskljucujem WiFi, posle duzeg vremena u sleep (suspend) rezimu rada WiFi prestane da radi i jedini nacin da ga ponovo ukljucim je ukoliko prije toga resetujem tablet. Da li je to problem same verzije rom-a ili postoji nacin da to rijesim nekim posebnim settovanjem.
Pozdrav

Poštovani g. Vujke!

Pridružio bih se svim čestitkama za ViewComb ROM … Od decembra naime koristim ver. 6.3 na POV Mobii Tegra i sve odlično funkcionira (osim malih detalja vezanih uz potrošnju baterije i WiFi koji su več poznati).

No, ovih dana Google je odlučio promjeniti Android Market i sada je to Google Play … i tu se je pojavio problem. Kada sam kliknuo da se slažem sa „Terms of use …“ instalirao se Google Play i izbrisao Android Market. To bi bilo OK, ali problem je u tome da Google Play ne radi (svaki puta se pojavi Force close kada ga pokušam pokrenuti).

Zato me interesira dali postoji neko riješenje za taj problem? Dali da ponovo resetiram POV na ViewCOMB 6.3 – dali u tom slučaju mogu zadržati Android Market koji je radio odllično? Ili dali je na putu nova verzija ViewCOMB 7.3 koja bi eventualno i taj problem riješila?

Na kraju bih rekao HVALA za ovaj odlični ROM i svo vrijeme i sav trud koji ulažete da ga napravite još boljim. Zaista ste programer sa stilom!

Pozdrav iz Slovenije,
DeniBoy

When Build 7.3 come?

Pa radi se o tome da se je Google Play sam instalirao kad sam kliknuo OK na „Terms of use“ ne znajuci da ce taj zamijeniti Android Market. Instalirala se je ver. 3.4.6 a ne znam dali je moguce update-ati i kako, jer ga ne mogu ni pokrenuti…

Uglavnom nadam se da ce se naci neko rijesenje i za to.
Hvala i pozdrav,
DeniBoy

Hi.
Sometimes touchscreen too sensetive.
Do you have any fix?
Thanks a lot for your job.

Pozdrav Vujke,

Interesuje me kada se moze ocekivati podrska za gps?

Hvala.

Hello

When does Build 7.3 come? I hope soon.
But please. Release Build 7.3 soon. For God

Which version has usb host on boot enabled ? Latest version hasn’t!!!

Sve nove aplikacije koje sam skino instaliraju se na tablet i ne mogu se prebaciti na SD karticu. Da li ima neki savet?

da li ovo radi na huawei ideos 7 slim

kazi mi, hoce li ovo raditi na viewpad 7?

Pozdrav, dobio sam ViewPad 10S, kad ga upalim samo se javi ekran uredjaj kao da je mrtav, pokusavam da pratim upustvo ali kad ga spojim preko usb-a ne javlja se kao novi hardware na pc-u! ima li neka procedura da ga flesham preko kartice ili sl. ?

Pozdrav, reci mi molim te kako mogu da resim sledeci problem: touch screen brljavi, najvise se primeti prilikom pisanja, probao sam uraditi kalibraciju ali ne pomaze (mislim da kalibracija u shuttle tools-u mi ne radi, jer kad pritisnem dugme, odmah okonca kalibraciju). Reci mi molim te da li je do tableta problem ili je software bug.

pozdrav uzeosam stick huawei E1750 od mtel oprtatera onje zaključan za druge kartice kako mogu ga dekodirati ili dobiti kod njegov.IMEI 354818048025735: probosam preuzeti skener i on odradi ja neznam đemujje rezultat pretrage nema nakraju da piše

Vujke svaka čast i hvala za ovaj software jer si nam umnogome pomogao sa njegovim razvojem!!!

Pozdrav Vujke. Moze li se ocekivati u skorije vreme neka novost u Viewcombu 3.2
Inace od resenog problema sa kabelom radi sve kao Svajcarac :-)

Попробую объяснить в двух словах.
Каждый из нас не неднократно сталкивался с ситуацией,
когда вынуждены заново инсталлировать Windows.
Уверен, что для всех это ситуация неприятна,потому-что:
- инсталляция занимает почти 2 часа;
- потом установки Windows
надо инсталлировать много
программ, которые используются на компьютере.
Так вот, чтобы избежать этих ненужных моментов
помогает создание образа системного диска.
Как мы будем делать образ диска?
С помощью программы [url=http://www.noutboom.ru]Acronics True Image.[/url]

Prijatelju, molim te da mi se javis na mail, ili da mi kazes svoj FB profil, zelio bih ti postaviti nekoliko pitanja….Hvala mnogo… dino.vila@hotmail.com